Test Pruners Header

Hose Fittings

“Firemans” Style Nozzle

DW122

“Firemans” Style Nozzle

With a simple twist, this quality fitting nozzle will go from Jet to Spray to Shut off.  Use with DW116 for quick connection.

Spares Pack

DW121

Spares Pack

With our quality Solid Brass Hose Fitting Range, there is so little to break or go wrong, but if you need any washers, “o” rings or hose clamps, they are all here in this simple pack which will last you for years.

Hose Mender

DW118

Hose Mender

The simple answer to a leaking hose is to cut-out the leaking section and join the two parts together with Darlac’s Hose Mender.

Thread Adapter ¾” – ½”

DW114

Thread Adapter ¾” – ½”

For those who still have their good old brass tap with a half inch thread, why not just bring it up to standard with this simple thread adapter.

Shut Off Valve

DW111B

Shut Off Valve

Has many different uses but the most popular will be to use near the end of a hose to stop the flow of water without returning to the tap.

Three Way Connector

DW108

Three Way Connector

Use on the end of a hose pipe to create two separate outlets.

Male Hose Connector

DW104

Male Hose Connector

Partner for the DW103 Hose connector. This completes the join between two hoses, comes in solid brass for durability.

Electronic Water Timer

DW253

Electronic Water Timer

The Electronic Water Timer has a two dial function for multiple watering options, independent watering frequency and run time. Will operate gravity fed from a water butt where required (requires threaded 3/4″ water butt tap). Incorporates a timer delay function. Low battery indicator using 2 x AAA alkaline batteries (not included). N.B. Must be removed […]

Take Anywhere Tap

DW420

Take Anywhere Tap

This hose end tap may be set up anywhere in the garden or allotment to provide a water source.

Take Anywhere Tap
Four Way Tap Manifold

DW401P

Four Way Tap Manifold

Two outlets with standard 3/4″ BSP threads to suit water timers etc. Two with made ends to accept popular quick connectors. All outlets swivel to avoid hose kinking and have an on/off valve.

Four Way Tap Manifold
Two Way Tap Manifold

DW201P

Two Way Tap Manifold

Create two outlets from one tap. Standard 3/4″ BSP connector. Both outlets swivel in the general direction of the hose to minimize the risk of damage or kinking. A simple twist on/off valve operates on each outlet.

Two Way Tap Manifold
4 Way Brass Manifold

DW403

4 Way Brass Manifold

2 Way Connector

DW107

2 Way Connector

Y Connector

DW110B

Y Connector

Y Connector
Water Stop Hose Connector

DW113

Water Stop Hose Connector

Tool Connector

DW116

Tool Connector

Hose Connector

DW103

Hose Connector

Tap Connector

DW115

Tap Connector

Contact Us - or call on (0044) 1753 547790

Contact information


captcha